2024-03-31

Surface Grinder FSG-618M/2A818/3A818

Product Features
※ All main castings of the machine are made of high-strength cast iron, and annealed by relaxation force to eliminate internal stress. The left and right and front and rear rails are designed with the best support distance, with super rigidity and excellent stability.

※ The spindle motor adopts V3 grade low-vibration spindle motor, and is matched with high-precision sleeve-type spindle. The main shaft adopts 4 P4 grade super-precision angular ball bearings. assembled.

※ The left and right movement of 2/3A818 worktable is composed of specially treated hardened steel rails and strictly screened steel balls, and the movement is light and stable; the left and right sliding surfaces of 2/3A1224 use a V-flat combination guide rail and a wear-resistant sliding sheet (Turctie - B) It is a sliding medium and is treated with precise scratches to maintain stable accuracy. The left and right stroke adjustment mechanism adopts electronic non-contact commutation, the operator can adjust it without any tools, and the left and right handwheels can adjust the position of the table according to the processing needs.

※ The front and rear sliding surfaces use double V guide rails and stick wear-resistant sliding sheets (Turctie-B) and are treated with precise scratching and automatic (intermittent) forced lubrication system, which can maintain the accuracy for long-term use.

※ 2/3A818 each screw and front and rear, lifting guide rails use automatic intermittent forced lubrication system to ensure mechanical precision and improve service life, 2/3A1224 models use automatic continuous cycle forced lubrication system.

※ 2 A models: The left and right strokes are driven by hydraulic pressure, and the front and rear strokes are driven by motor indirectly.

3 A models: The left and right strokes are driven by hydraulic pressure, and the front and rear and lift strokes are driven by motor indirectly.

※ Based on safety considerations, an automatic power-off device interlocking with the electrical box door is designed.

Product Specifications

※ FSG-618M/2/3A818

※ Table size (WxL): 618M: 5-3/4"×18"(146×460mm)/2/3A818: 8"×18"(203×457mm)

※ Maximum distance from table to spindle centerline: 18" (457mm)

※ Main spindle motor: 618M: 2Hp/1.5kw 2/3A818: 2HP-2P / 1.5kw

※ Spindle speed: 618M: 60Hz/3450rpm, 50Hz/2850rpm/2/3A818: 60Hz/3450rpm 50Hz/2850rpm

special accessories

※ Rotary magnet
※ Parallel dresser (hydraulic)
※ Electromagnet
※ Rotary electromagnet
※ Solenoid controller
※ Lift and install quick-action fine-tuning
※ Manual paper bag type water machine
※ Unilateral retaining wall
※ Single-use electromagnetic water filter
※ Bilateral movable cover
※ Vacuuming electromagnetic dual water machine
※ Vacuum and dual water machine
※ Vacuum cleaner