Cylindrical Grinder FCG-P2040CNC/2060CNC/FCG-A2040CNC
Product Features
※ Appearance: The bed design is made of alloy cast iron with high strength and low deformation. The machine tool has small deformation and high rigidity.
(1) The mechanical and electrical integration design is convenient for installation and transportation.
(2) The machine tool adopts a fully enclosed cover.
(3) The key electrical appliances, electric motors, servo motors, and pneumatic control centers are all arranged externally to reduce the interference of the aerosol in the grinding area on the motors, increase the service life of the electrical appliances, and facilitate maintenance. Three-color warning lights are installed above the machine.
※ Feeding system: The grinding machine adopts the double linkage configuration of X and Z axes. The feeding of the grinding wheel box and the movement of the worktable are controlled by the Fanuc servo motor through the silver high-precision ball screw, which has high positioning accuracy. Guaranteed size error between 0.001mm. The front and rear movement of the grinding wheel box and the left and right travel guide rails adopt a hydrostatic oil film automatic lubrication system to ensure smooth and smooth movement of the grinding wheel box and precision feed to ensure grinding accuracy. The table top of the grinder adopts a three-layer waterproof design: cast iron table top + a seamless waterproof cover under the cast iron table + a waterproof leather tiger type waterproof cover inside the seamless waterproof cover, which can effectively protect the linear guide and the ball screw in the machine. Accuracy, reduce wear and tear caused by aerosol entering.
※ Grinding wheel box: The main shaft adopts hydrostatic bearing structure, and the grinding wheel main shaft is precision machined from nickel, chromium and molybdenum alloy steel. It is supported by hydrostatic bearing, which greatly improves the stability of operation and the minimum temperature rise.
※ Machine tool headstock: The headstock motor is driven by a servo motor, providing accurate speed setting, and is controlled by S code, with a variable speed range of 60-300rpm.
※ Online detection system: The machine tool is equipped with an outer diameter measuring instrument, and the outer diameter is automatically measured to complete the automatic measurement of the outer circle to achieve closed-loop control, ensuring that the dispersion degree is less than or equal to 0.005mm.
※ Hydraulic system: The hydraulic oil tank has the function of liquid level display and alarm; standard hydraulic components and hydraulic pipe fittings are used; the pressure of the pipeline system can be adjusted visually.
※ Pneumatic system: The components are made of Japanese SMC products, and the air source interface is connected with triple parts of air filter, water separator and pressure regulator. With pressure alarm function, a pressure gauge is set on the main road, and the set pressure of the pressure gauge is indicated by a sign. One-touch fittings are used for compressed air hose connections that are frequently disassembled.
※ Automatic lubrication system: The machine tool adopts a fully automatic working centralized lubrication system with automatic oil filling function and cooling device.
※ Cooling system: The coolant is automatically controlled to achieve large flow and sufficient cooling and grinding. Equipped with electromagnetic chip remover (40L).
Product Specifications
※ FCG-P2040CNC/2060CNC/FCG-A2040CNC
※ Roundness ≤ 0.8 um
※ Cylindricity ≤ 2 um
※ Roughness ≤ Ra0.2um
※ Model positioning accuracy: 1um
※ Maximum processing diameter: 190mm
special accessories
※ Paper bag electromagnetic water filter
※ Oil mist recovery machine
※ Optical ruler
※ Grinding wheel dynamic balance corrector
※ End face measuring tool
※ Wheel balance table
※ Anti-collision device
