Vertical plus line rail QP2033-L/2040-L
Product Features
※ The main large parts of the machine tool: the base, saddle, worktable, column and headstock are all made of high-quality resin sand, high-strength and high-quality cast iron, and have a perfect heat treatment process to eliminate residual stress, and arrange enough rib plates to ensure The whole machine has sufficient strength, rigidity and high stability;
※ High-precision spindle design:
Unique design, φ70mm super large diameter is supported by ABEC Class 7 (P4 ultra-precision angled ball bearing with large span, so that the spindle can bear strong radial and axial thrust, excellent rigidity, can eliminate the vibration caused by heavy cutting of general spindle .
High-precision spindle design, direct-type 12000rpm high-rigidity BT40 spindle made in Taiwan, China.
※ Spindle center water outlet design (special accessories):
Provide 20.4kg/cm high-pressure cutting fluid, which can effectively take away chips and heat sources in surface and deep hole machining, improve tool cutting performance and life, and maintain accurate workpiece accuracy.
※ Large-span body design:
Large-span body design, single-piece large-slope Y rear cover, convenient for chip removal.
The center span of the Y-axis rail is 560mm, and the span of the one-piece machine foundation screw is 880mm, which can fully support the full stroke of the shaft.
※ High-precision ball screw:
The triaxial screw adopts φ40mmxP12mm, and C3 grade is properly pre-tensioned to strengthen the axial rigidity and reduce the thermal extension.
※ Large slope design full cover chassis
Slope design full cover chassis, not easy to accumulate chips. Standard back flush, which can meet the general chip amount. Standard configuration of front-mounted crawler chip remover.
※ X, Y axis integrated motor seat
X, Y axis integrated motor seat, bearing seat. The bearing hole, the base and the saddle are processed at the same time, which increases the rigidity and precision of the feeding system.
※ X/Y/Z track design
The three-axis linear track design is 34mm wide, and the Z-axis adopts a long slider design to increase the rigidity of the Z-axis. With the automatic lubrication system, it can maintain the precision, long life and cutting and heavy load. The Y-axis travel is 530mm, covering most of the mold and parts processing needs.
Product Specifications
※ QP2033-L/2040-L
※ Positioning accuracy: JIS B6338±0.003mm/300MM
※ Repeated positioning accuracy: JIS B6338±0.002mm
※ Rapid movement (X/Z): 36/36/36 m/min
※ Spindle speed range: belt drive: 10000rpm; direct drive: 12000rpm
※ Number of tools: 24-arm type
special accessories
※ BT-40orCT-40orJT-40 broach screw
※ 8000/12000rpm belt spindle
※ 12000/15000rpm direct spindle
※ Preparation of the fourth axis
※ A complete set of the fourth axis rotary table,
※ Automatic tool length measurement
※ Spindle center water outlet device
※ Front and rear double helical chip removal device
※ 32 tool arm chain tool magazine
※ Oil-water separator
※ ZF gearbox
※ Optical ruler
※ Oil mist vacuum cleaner
