China Taiwan Fuyu three-axis automatic control high-precision surface grinder FSG-2480ADS
Product name: Three-axis automatic control high-precision surface grinder
Brand: China Taiwan Fuyu CHEVALIER
Model: FSG-2480ADS
Origin: Taiwan, China
China Taiwan Fuyu Introduction:
China Taiwan Fuyu Enterprise Co., Ltd. was established in 1978. Its head office is located in Daya Township, Taichung County, Taiwan Province, China. It is one of Taiwan's machine tool factories. Series of machine tool manufacturers, the main products are high-precision CNC surface grinders, CNC precision forming grinders, CNC gantry rail grinders, CNC horizontal lathes, turning-milling complex centers, CNC vertical lathes, CNC vertical turning-milling complex centers, vertical Type machining center, boring and milling center and large gantry machining center, etc.
Our company is the Guangdong agent of China Taiwan Fuyu Enterprise Co., Ltd., has professional selection experience, provides professional pre-sales and after-sales services, and also accepts other Fuyu machine tool maintenance.
Mechanical characteristics:
Fully automated grinding mode
The micro-processing controller is used to automate the grinding process, that is, automatic rough grinding, automatic milling of the grinding wheel, Y-axis can automatically compensate in sections, fine grinding, and zero grinding, until the grinding is completed, the left or right limit position is stopped according to the selected point. The spindle stops or continues to run according to the selection, and the Y axis is set to the starting point or reference point according to the selection, which is very suitable for mass production.
Rigid design of precision spindle and lifting rail
Increase the diameter of the spindle shaft and use 4 P4 self-lubricating angular ball bearings to support (6 in the 24 series). The spindle motor has undergone precise dynamic balance correction and the use of oblique key track design, so that the grinding is more stable and the accuracy is more accurate. .
Auto-correction and dresser (special accessory)
Purchasing this accessory, in conjunction with the machine program design, can automatically mill the grinding wheel and Y-axis compensation during grinding, so as to reduce grinding man-hours, improve work efficiency, and greatly reduce costs.
Track full support design
The left and right rails, front and rear rails are designed with super-long full support, which makes the precision of the worktable and the machine body more stable when moving, and improves the rigidity and life of the machine.
Rigid strengthening design of the main body of the machine
In order to increase the rigidity and stability of the machine, the machine body adopts honeycomb ribs to ensure the accuracy of grinding workpieces. The front base and rear base are longer and strengthened.
Front and back stroke setting
The front and back stroke setting of the touch control breaks through the traditional design concept and is more in line with humanized operation.
AC servo motor lifting transmission mechanism
The spindle lifts and lowers using heat-treated grinding screw (20 series), precision ball screw (24 series), driven by AC servo motor, with high torque, high speed, and track design with large contact surface, and high positioning accuracy. Equipped with electronic hand wheel fine adjustment (MPG), not only the feed accuracy can reach 0.001mm, but also the operation is more convenient.
Front and rear transmission speed control
The continuous movement speed of the saddle is controlled by the frequency converter in 20ADIII, and the servo motor before and after 24ADS is controlled by the magnification switch, which can obtain good surface grinding accuracy and grinding wheel dressing effect.
Body structure
The fuselage structure is made of high-density cast iron, which has been annealed. The structure is reinforced with super strong cross ribs and analyzed by computer, so the rigidity and stability are greatly improved. It adopts square slide rail with high-precision ball screw and AC servo motor to drive up and down, smooth movement and high precision, suitable for heavy cutting.
Automatic lubrication system (20 & 24 series)
Equipped with an automatic circulating oil tank for forced lubrication and a safety switch. When the lubricating oil pressure does not reach the set standard, the warning light will be on to remind the operator to avoid lack of lubrication and reduce the life of the machine.
Left and right slide
Adopting double "V" slide rail design and pasting (Turcite-B) wear-resistant glue to make the left and right movement more stable. The front base is formed in one piece, and the track is super long and fully supported
The type design makes the worktable fully bear the load when moving left and right, and the accuracy is more stable.
Forward and backward feed transmission mechanism
The AC servo motor drives the ball screw for forward and backward transmission and ENCODER button stroke setting, which is easy to operate and efficient.
Spindle seat counterweight mechanism
The hydraulic counterweight is used to greatly reduce the wear of the lifting screw, eliminate the backlash, increase the precision sensitivity, and improve the grinding accuracy.
Mechanical specifications:
Item FSG-2480ADS
Capacity capacity Grinding length-left and right 2000mm
Grinding width-forward and backward 600mm
Distance from table to spindle center 850mm
Workbench Workbench size 600×2000
T-slot (size×distance×quantity) 14×210×3
Distance from table to ground 880
Table speed 5~25m/min
Workbench stroke 2100
Lateral movement, rapid movement 0~5m/min
Automatic lateral movement 3~32mm
Every turn-
Each scale 0.02mm
Horizontal movement stroke 675mm
Wheel head vertical movement, rapid movement 400mm/min
0.001mm per scale
Spindle Spindle speed 60Hz / 1,750rpm, 50Hz / 1,450rpm
Grinding wheel (outer diameter×width×aperture) Ø406mm x Ø75mm x Ø127mm
Spindle motor 11kW
Power capacity 23.6kW
Storage tank capacity Oil pressure tank capacity 250L
Lubricating oil capacity 20L
Mechanical size Mechanical height 2,770mm
Floor area 3,660mm x 6120mm
Machine weight 10,600Kg (23,320lbs.)
Standard accessories:
1. Tool box, 2. Grinding wheel hub, 3. Grinding wheel, 4. Lock nut, 5. Pull out the nut, 6. Adjust the balance shaft, 7. Meniscus wrench, 8. Torx wrench, 9. Fuse, 10 . Paint cans, 11. Foot pads, 12. Leveling bolt set, 13. Waterproof cover
Special accessories:
 |
 |
 |
Large quartz work light
B01-0702X |
Diamond Pen Holder
B03-0701X |
grinding wheel hub
B05-0701X |
 |
 |
|
Paper belt water filter (with a roll of filter paper)
B17-0701X |
Paper Tape Electromagnetic Water Filter
(With a roll of filter paper)
B17-0702X |
Automatic grinding wheel correction and dresser
B13-0708X |
 |
 |
 |
Spindle motor
B31-0701X
B31-0705X
B31-0706X |
frequency converter
B48-07081
B48-07061
B48-07011
B48-07021
B48-07031 |
solenoid
B09-0701X
B09-0702X
B09-0704X |
 |
 |
 |
Grinding wheel dynamic balance corrector
B44-0703X |
Orbital Balance Platform
B15-0703X |
roller balance platform
B15-0702X |
 |
 |
 |
Spindle oil temperature cooling regulator
B42-0801X |
solenoid controller
B23-0704X |
grinding wheel |
