JIS K 6253 standard rubber hardness tester TECLOCK from Japan
Product number:
GS-719N, GS-719G, GS-719R, GS-720N, GS-720G, GS-720R, GS-721N, GS-721G, GS-719P, GSD-719K, GSD-720K, GSD-721K, GSD- 719K-R, GSD-720K-R
product name:
Hardness Tester, Rubber Hardness Tester
product manual:
TECLOCK rubber hardness tester, in some cases, such as measuring uneven surface or narrow flat surface and deep bottom, can be accurately measured.
The product has digital display, pointer (double needle and single needle).
The product also has various designs to choose from, such as deep hole (H) type and long leg (L) type, both of which provide pointer type and digital display dials.
4. The products conform to the JIS K6253 standard
Product Usage:
There are three general models of the hardness tester, A, D and E. When the A type is used for measurement, the hardness is greater than 90, then the D type is suitable. When the A type is unreasonable, and the hardness is less than 20, the E type is suitable. .
Type A is a rubber hardness tester for measuring general plastics.
Type E is a hardness tester for measuring soft plastics, such as sponge and soft rubber.
Type C is a durometer for rubber whose hardness is less than that of Type A.
Type D is a hardness tester for measuring height hardness. Such as hardness rubber, plastic hard rubber. If there is an unbalanced measuring surface, reduce the plane, for the irregular shape of the bottom of the concave and convex deep, it can be measured well, digital display, easy to read the measured value.
Features:
GS-719N, GS-719G, and GS-719R belong to Type A, and the hardness suitable for measurement is the same.
GS-719N is suitable for manual measurement.
GS-719G is suitable for manual measurement. Compared with GS-719N, it has an additional setting pin.
GS-719R, the diameter of the pressure surface is Ø18mm, which can be used manually and with a measuring table.
GS-720N, GS-720G, and GS-720R belong to Type A, and the hardness suitable for measurement is the same.
GS-720N is suitable for manual measurement.
GS-720G is suitable for manual measurement. Compared with GS-720N, it has an additional setting pin.
GS-720R, the diameter of the pressure surface is Ø18mm, which can be used manually and with a measuring table.
Ø18mm pressure surface:
Picture of Needle Type (Double Needle Type):
specification:
|
model
|
Types of
|
Application/Material
|
Stylus shape
|
Spring load value
|
|
GS-719N
|
Type A (standard)
|
General purpose rubber (medium hardness)
|
φ0.79 truncated cone 35°
|
550-8050mN
（56.1-821.1gf）
|
|
GS-719G
|
Type A (Pin type)
|
General purpose rubber (medium hardness)
|
φ0.79 truncated cone 35°°
|
550-8050mN
（56.1-821.1gf）
|
|
GS-719R
|
Type Aφ18mm (Pin type)
|
General purpose rubber (medium hardness)
|
φ0.79 truncated cone 35°
|
550-8050mN
（56.1-821.1gf）
|
|
GS-720N
|
Type D (standard)
|
Hard rubber (high hardness)
|
Tip diameter R0.1
35° conical
|
0-44450mN
（0-4533gf）
|
|
GS-720G
|
Type D (Pin type)
|
Hard rubber (high hardness)
|
Tip diameter R0.1
35° conical
|
0-44450mN
（0-4533gf）
|
|
GS-720R
|
Type Dφ18mm (Pin type)
|
Hard rubber (high hardness)
|
Tip diameter R0.1
35° conical
|
0-44450mN
（0-4533gf）
|
|
GS-721N
|
Type E (AO) (standard type)
|
Soft rubber (high hardness)
|
Hemisphere SR2.50
|
550-8050mN
（56.1-821.1gf）
|
|
GS-721G
|
Type A (Pin type)
|
Soft rubber (high hardness)
|
Hemisphere SR2.50
|
550-8050mN
（56.1-821.1gf）
|
|
GS-719P
|
Type A (Pin type)
|
General purpose rubber (medium hardness)
|
φ0.79 truncated cone 35°
|
550-8050mN
（56.1-821.1gf）
|
|
GSD-719K
|
Type A (digital display)
|
General rubber, soft plastic
|
φ0.79 truncated cone 35°
|
550-8050mN
（56.1-821.1gf）
|
|
GSD-720K
|
Type D (digital display)
|
Hard rubber, plastic
|
Tip diameter R0.1 30° conical
|
0-44450mN
（0-4533gf）
|
|
GSD-721K
|
Type E (AO) (digital display)
|
Very soft rubber material
|
Hemisphere SR2.50
|
550-8050mN
（56.1-821.1gf）
|
|
GSD-719K-R
|
Type Aφ18mm (digital display)
|
General purpose rubber (medium hardness)
|
Hemisphere SR2.50
|
550-8050mN
（56.1-821.1gf）
|
|
GSD-720K-R
|
Type Aφ18mm (digital display)
|
Hard rubber (high hardness)
|
Tip diameter R0.1 30° conical
|
0-44450mN
（0-4533gf）
|
Dongguan Gaotengda Precision Tools Co., Ltd.
[Agent CHEVALIER Taiwan Fuyu Precision Surface Grinding Machine CNC Grinding Machine]
FSG-12_16_20 series_new energy industry_lithium battery coating nozzle
FVGCseries_TC_20210518_V4 New Energy Industry
SMART-B818III_New Energy Industry_Ultrasonic Welding Head
Taiwan Fuyu CHevalIER CNC surface grinder, large water grinder
Vertical machining center, 5-axis machining center QP5X-400
Multifunctional CNC lathe, CNC lathe Taiwan Qiaojia JAGURA cylindrical grinder, centerless grinder
Japan RS-Japan Ultrasonic High Speed Spindle
Korea KTC fine hole electric discharge machine, punching machine
Italy DELTA vertical grinder LC-400, LC-500
Swiss DAMA Sharpener MM-12
Japan AMADA turning and milling compound processing machine
Japan Mitsui MITSUI surface grinder, grinder
Japan KIRA Kira machine tool KPC-30b, PCV-30
Japan Kondo circular grinding CKG series, ASZ series, UGK series, CTW series
